Dehumidification of swimming pool, bathroom and sauna

With the continuous improvement of people's living standards, people put forward higher requirements for the environment of swimming, sauna and other leisure places. For a long time, how to control the air temperature and humidity in the natatorium is a difficult problem. Wet air not only makes people feel stuffy and uncomfortable, but also causes serious corrosion to the buildings and decorations in the museum. In the past, it has been taking measures to increase the ventilation frequency and replenish a lot of fresh air to improve the air quality in the museum. But a lot of ventilation takes away not only a lot of steam, but also a lot of heat contained in the steam.

A medium-sized swimming pool evaporates about one metric ton of water a day. If it is not removed effectively, it will be detrimental to the building structure. In addition, people who are moving by the pool will feel uncomfortable. These will affect the income of the swimming pool. The relative humidity should be controlled below 65%.

Swimming pool is a place with high energy consumption, and its operation cost is very important. Hygroscopic dehumidifier can not only successfully control humidity, but also save about 50% of the operating cost compared with other systems.

The water used in the indoor swimming pool is tap water, and the disinfection of tap water is carried out with chlorine containing bleaching powder. In order to ensure the cleanliness of the water, the water needs to be disinfected every day. All these disinfection measures use chlorine containing products. So when the water on the surface of the indoor swimming pool evaporates, the room will be filled with a lot of chloramines / trihalomethanes, which has a stimulating effect on human body and seriously endangers human health. Trihalomethanes can cause cancer!

According to foreign research data, more than 90% of the heat loss in the swimming pool is caused by the evaporation of the swimming pool surface. Most of this energy, as well as water vapor (latent heat energy), exists in the air of the swimming pool.

In the traditional ventilation and dehumidification mode (national standard: indoor area of swimming pool with exhaust air volume of 4 times per hour), in spring, autumn and winter, all the "latent heat energy" inside the swimming pool will be discharged to the outside, resulting in a large loss of heat energy inside the swimming pool, while in summer, it will cause a large loss of cold energy inside the swimming pool.

A large amount of evaporation of indoor water vapor will cause the room to be filled with chlorine containing humid air, which will condense into water droplets when it is cold. Chlorine containing water droplets show acidity, which will cause corrosion to buildings, and in serious cases, it will lead to house collapse.

The comfortable air humidity of human body is in the range of 45% to 65%. Excessive evaporation of the swimming pool will make the environment of the swimming pool very humid, which will lead to water vapor, condensation and dripping, making swimmers feel uncomfortable. This will lead to consumers will not come again, people come to indoor swimming is to enjoy, not to suffer.

In this case, anti-corrosion dehumidifier can be a good solution. After absorbing the moist air, the anti-corrosion dehumidifier will emit dry air, and the temperature of the air will be higher than the room temperature, so that the heat energy in the swimming pool will not be lost, so that the building will not be corroded and damaged. After lowering the air temperature, swimming in the indoor swimming pool will feel comfortable and will not affect people's health.

Advantages of anti-corrosion dehumidifier products:

1. The structure of the whole machine is reasonable: the "intelligent fan delay shutdown" system, humidity setting and automatic control are adopted. The machine is equipped with humidity and temperature display. The humidity is set from 30% to 90%. When the humidity reaches the set value, the machine will stop automatically. When the humidity is higher than the set value, the machine will start automatically for dehumidification (after the humidity is set, the machine will automatically sense the air, start automatically when the humidity is wet, and shut down automatically when the air is dry to realize automatic control)

2. 1-24 hours of timing, with fault self-test function: you can feel at ease when you go out, timing switch function, 1-24 hours setting, convenient for you to turn off when you go out, no need to watch, automatic induction, self dehumidification. The machine is equipped with automatic fault detection function. If there is a fault, the machine will automatically detect the cause and display the corresponding fault code to facilitate maintenance

3. Design of inner thread copper tube of two heat exchangers: enough materials, good heat dissipation, long service life, and not easy to corrode.

4. Humanized design, easy operation: hose connection, automatic drainage, eight wheel bearing universal wheel design.

5. Power off memory function: power off memory function, once set, the machine automatically switch on and off, once the power is off, such as after power, it will automatically start, no need to start manually.

6. LG brand compressor: service life up to 8-10 years. We use LG brand compressor - service life up to 8-10, integrity dehumidifier manufacturers, use at ease.

7. Select real data for industrial use: reject virtual label. The standard data are calculated by precision experiments, please rest assured to purchase.

8. Body stainless steel plate: durable, no rust.

9. Anti corrosion: it has the function of anti-corrosion.