Attention to dehumidification and moistureproof of hardware warehouse

Frequent precipitation makes the air in the warehouse very humid, and the air humidity rises, which seriously affects the storage of goods. For example, if goods are piled up inside the warehouse for a long time, the ventilation effect is very poor, and it is easy to mildew in wet weather, which brings huge losses to the enterprise.

        Among them, there are a lot of metal products stored in the hardware warehouse, and the main problem in the storage work is anti-corrosion. Metal corrosion is caused by the chemical or electrochemical action of the surrounding medium.

        The main causes of metal rusting are: atmospheric relative humidity, air temperature and humidity, corrosive gases, etc., among which atmospheric relative humidity, air temperature and humidity are the main causes of metal rusting.

        After the metal products rusted, the appearance quality will be affected, the use will be affected, and even scrapped. Therefore, hardware must be properly kept, pay attention to rust.

        Because the hardware material is easy to be oxidized due to the influence of air humidity, the temperature control range should be controlled within 20 ℃ ± 5 ℃, humidity control range is 50% ± About 20%. In fact, humidification can be done by manual operation (such as dragging the wet mop on the aisle of the warehouse, but the mop should not be too wet to cause water accumulation on the ground) or opening windows to increase air circulation. However, manual humidification has many limitations, and its effect is very small; It's worse to open the window in rainy days

  A good way to control the temperature and humidity in the warehouse is to add dehumidifier (industrial use) to achieve the purpose of humidification and dehumidification through airtight environment.

  The company is a research and development, production, sales as one of the special temperature and humidity control equipment high-tech enterprises. It mainly produces a series of air temperature and humidity control equipment, such as household, commercial dehumidifier, industrial dehumidifier, central dehumidifier, central fresh air, constant temperature and humidity, wheel dehumidifier, high temperature heat pump drying and various humidifiers, etc. at the same time, it can customize all kinds of non-standard temperature and humidity control equipment according to customer needs. The industrial dehumidifier produced by our company is widely used in various companies and factories to avoid the economic loss caused by the moisture problem in the warehouse.

  Advantages of industrial dehumidifier

  1. Dehumidification area: 80-1600 square meters;

  2. With air temperature and humidity freely set, and automatic control, truly achieve full automation;

  3. Timing switch function, from 1-24 hours arbitrary setting;

  4. With automatic fault detection function, if there is a fault, it will automatically detect and display the corresponding fault code, which is convenient for maintenance;

  5. Good compressor, powerful power and good dehumidification;

  6. The machine is suitable for low temperature environment, and automatic frost, applicable temperature: 5-38 ℃

      When we encounter rainy days, relatively high humidity, large temperature changes before and after the situation, the warehouse management personnel of factories and enterprises should make preparations as early as possible, configure the industrial dehumidifier of corresponding size or dehumidification capacity to carry out reasonable dehumidification, so as to prevent raw materials, products, equipment from being damaged by moisture!